TTC-20 Solder tip tinner tip cleaner Tip Refresher Tip activator Lead free

Description

SOLINS TTC-20
Solder tip tinner and cleaner, Tip Refresher, T
ip activator,
Tip Brite, Lead free,
RoHS Compliance, net 20g
SOLINS TTC-20 (
tip tinner and cleaner) designed for fast and efficient cleaning and tinning of soldering tips,
which can no longer be cleaned with a cellulose sponge, bronze chips or tin-plated with solder.
THIS PRICE FOR  1PCS !!!
You can buy a box of 12 pieces  Solins TTC-20 Lead Free Solder Tip Tinner Cleaner  - http://www.ebay.com/itm/282085960760
APPLICATION:
1. Set the soldering temperature to t = 300-450ºC.
2. Immerse heated thorn at an angle of ~ 45º, and slowly rotate.
3. Means melts actively cleans the sting.
4. Remove the formed slag and excessive tin with moist cellulose sponge.
5. If the sting operation not recovered, repeat the procedure.
PRODUCT FEATURES:
The tool extends the tip service
Environmentally safe (corresponding to RoHS compliant directive)
Easy to use.
Not smokes at work
Meets «ESD safe» specification (anti-static)
CONSISTS:
ammonium phosphate, tin fine powder, a binder.
Packing: (net 20 g) in a cardboard box.
2-sided adhesive tape on the foam basis, for attaching a jar on a stand soldering iron
Instructions for use.
Product code (EAN-13) 4607131331520 (1 pc)
Product code (EAN-13) 4607131331322 (12 pcs.)
Tip
tinner
& cleaner
TTC-20
Lead-free
When the surface is oxidized, it becomes dark in color and it does not wet properly.
The tip refresher composed
of a mild acid removes the oxides on the tip, coats the tip with tin, and restores the wetting capability of the tip when cellulose or brass sponges or normal tinning is not helping anymore.
Features:
1. TTC-20 is universal solution for all types of solde
ring iron tips
2. Prolongs tip life
3. RoHS compliant
4. Ease of use
5. Low to zero smoke emits
6. ESD safe
WARNING!
Weak acid.
Make sure you completely remove the tip cleaner from the tip before starting to solder PCBs. If the tip cleaner
remains on the tip it may stick to the PCB and corrode components.
How to use:
1. You may attach TTC-20 can to soldering iron stand with attached double-sided tape.
2. The proper tip temperature is 300°C-450°C.
3. Dip the tip in the Tip Refresher.
At the p
roper temperature: Tip Refresher dissolves while producing minor smoke and bubbles.
At a lower temperature: Pieces of the Tip Refresher may stick to the tip. Continue to heat up for a while.
At a higher temperature: Smoke and bubbles are produced with a cr
eaking sound when the tip is dipped. Lower the tip temperature.
4. Put solder on the tip. Clean the tip completely with the sponge on the soldering iron stand.
5
. Put solder on the tip again, now the tip wetting is restored and the tip is tinned. If the ti
p is still not wetting properly, repeat 2.
and
3.
several
times.