TIRE ROPE for TOY VEHICLES -- CUT TO LENGTH 10ft LENGTH approx 1/4" DIAMETER

Description

**** rubber  TIRE ROPE for TOY VEHICLES  -- YOU CUT TO LENGTH NEEDED FOR YOUR RIM       1 BID = 10ft LENGTH     approx 1/4" DIAMETER.  very simple to use -- took me less than 2 minutes to do this 1 wheel.   Wheel shown is 1-7/8" diameter -  tire shown is over 7/32"  but a hair less less than 1/4.  The way it works is you cut the rope with a slight bevel (equal spot on each side so that the ribs line up when pressed together). What holds the ends together is a stiff, bent nail . I prefer a small 1-1/4 to 1-1/2 inch galvanized nail bent on a curve to match wheel curve (the galvanized adds some roughage to hold the pieces together).  I use nails  or stiff wire that are only slightly larger than rope hole, so that it grabs, but doesn't increase the tire diameter. You could even drill the tire out if your nail is too thick. You should also add some sort of adhesive/glue.  For these PICTURES  I didn't use glue so you could see the joint.  When glued , put pressure to ensure a tight fit. Possibly super glue or if using a slower drying material, try duct taping until dried.
**  WHEEL NOT INCLUDED **
**  SEE my OTHER LISTING FOR SMALLER SIZE **
**  NO INSURANCE COVERAGE ON 1st CLASS , UNLESS ADDED & PAID FOR.
If you have any questions, PLEASE E-MAIL. **** ` all items sold as is **** . Check my other listings for A WIDE VARIETY OF NEAT ITEMS  ..
I do combine shipping *** Shipping is
usually NLT the day after funds received (EXCLUDING SUNDAY) ... either by 1st class OR parcel post OR priority . ....
I PACK ITEMS FOR A SAFE DELIVERY TO YOU ...
THANKS FOR YOUR PURCHASE(S)
EBAY  BUYER/SELLER SINCE 1995 or 1996