SB Acoustics Satori WO24P-8 9.5" Egyptian Papyrus Cone Woofer

Description

SB Acoustics Satori WO24P-8 9.5" Egyptian Papyrus Cone Woofer
SB Acoustics Satori WO24P-8 9.5" Egyptian Papyrus Cone Woofer
Satori WO24P-8
9.5″ Egyptian Papyrus Cone Woofer
The Satori range was founded to separate more expensive projects from a wider range of more affordable – but still high-end – SB Acoustics products. “As we get more experience, new materials, better simulation tools, we believe in benefiting the customer with those improvements. We always knew that geometry is essential and we are working more and more with geometry. Every time we get new materials, like beryllium, and we optimize the designs, there’s always room for improvement. We’ve been able to implement significant improvements with beryllium, and we could obtain pretty good results in combination with geometry.”
Egyptian Papyrus
Now under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber surrounds for optimum transient response and low resonance frequency. The cones reveal the natural textures of the papyrus material imported from Egypt, resulting in a distinctive appearance, which will certainly be appreciated for high-end speakers.
For these new Satori drivers, the original ideal was to keep the natural finish of the Papyrus fibers as much as possible, which results in a light brown color. Since Papyrus fibers are not uniform, the cone shows visible spots of different colors which give it a look of a natural “organic” material – but the discussion about potential problems in the market arising from the wrong perception that those were “defects” or signs of an “old” driver, led the design team to also create a black version of the same cone. The fibers are still visible, but for more traditional clients, it might be better accepted.
FEATURES
Hard paper cone for improved piston operation (made in-house)
Large optimized ceramic magnet motor system with under-cut pole piece and dual shorting rings
Vented aerodynamic cast aluminium chassis for optimum strength and low compression
Soft low damping rubber surround for optimum transient response
Linear symmetric suspension design for improved dynamic performance
Non-conducting fibre glass voice coil former for minimum damping
Long life silver lead wires attached 180° apart for improved stability
Vented pole piece for reduced compression
High piston to chassis diameter ratio
Gasket and bolt hole protrusions for reduced coupling to speaker cabinet
Some box suggestions:
Sealed box of 0.8 to 1.2 cubic feet for a 3dB down of about 50Hz
Vented 1.25 cubic feet with 2″ Ø vent by 8″ long for f3 of 36Hz
Vented 1.5 cubic feet with 2″ Ø vent by 7″ long for f3 of 33Hz
Vented 1.75 cubic feet with 2″ Ø vent by 6″ long for f3 of 31Hz
Vented 2.0 cubic feet with 2″ Ø vent by 5″ long for f3 of 29Hz
PDF
Hard paper cone for improved piston operation (made in-house)
Large optimized motor system with under-cut pole piece and dual shorting rings
Vented aerodynamic cast aluminium chassis for optimum strength and low compression
Soft low damping rubber surround for optimum transient response
Linear symmetric suspension design for improved dynamic performance
Non-conducting fibre glass voice coil former for minimum damping
Long life silver lead wires attached 180° apart for improved stability
Vented pole piece for reduced compression
High piston to chassis diameter ratio
Gasket and bolt hole protrusions for reduced coupling to speaker cabinet
Shipping
Handling time:
Depending on ordering time, handling time will take 7-14 working days.
Usually we order items on Wednesday and ship them out on next Tuesday or Wednesday
We do not stock items. Only Europe customers can have next day shipping
Shipping cost:
Combined with every item you purchase
Delivery time:
Depends on shipping carrier. Usually 3-5 working days.
There is an option for faster shipping.
Payment
We accept the following payment methods:
Paypal
Please contact us if you have any questions.
Service
Customs - Ask about invoice declaration
Condition - New straight from the factory
Items location - EUROPE