Black Mamba FHG High Tack MS60 Mono Component Sealant Cartridge - White

Description

Black Mamba FHG High Tack MS60 Mono Component Sealant Cartridge - White
Black Mamba FHG Adhesive makes silicone obsolete for hanging sinks. INSTANT BONDING POWER. Hang a bowl in less than 1 minute!
Ideal for mounting porcelain lavatories, stainless and composite undermount sinks. A single tube will provide enough adhesive to mount 3 to 5 lavatory bowls or 2 to 3 stainless undermount sinks.
High immediate holding strength and extreme temperature resistant. This product loves dissimilar materials.
Replaces silicone, screws, clamps and clips. High initial bond strength eliminates the need for mechanical fixing or support while bonding heavy objects. Cures without shrinking, resists vibration and remains flexible.
Besides using this product in the Stone Industry, it is being used in Boating, Trucking, Signage, Masonry, Window and Cabinet industries.
MS60 High Tack is made of mono component MS polymer adhesives. These adhesives react with humidity in the air and offer optimal sealing even under pressure. The main advantage with this product is the speed at which the skin can form. The adhesive will "skin" over in 10 minutes. Full cure achieved at a rate of 5mm per 24 hours.
*It is recommended to use this product in temperatures varying between -40 and 140°C but optimal qualities are achieved between 5 and 35°C. Shrinkage is at 1% and the elongation at break can go up to 400% which enables it to resist to impacts, vibrations and peeling. It is resistant to water, UV exposure, yellowing and aggressive environments such as alkaline, diluted acids, polar solvents, oils and more*
*Black Mamba FHG is a
GREEN
product with ultra -low VOC content with virtually no solvents making it extremely environmentally friendly*.
This product is sold and shipped by Hannah Industrial Solutions